Size Guide

All sizes and measurements are approximate, however we do make every effort to ensure they are as accurate as possible.


  1. Jacket length

  2. Crown to cuff

  3. Chest – all the way round

The size of jacket corresponds closely to your actual chest measurement (ie a size 40r is to fit a 40 chest) . The Jacket fitting or height is indicated by the letter after the chest size. In this example by the letter “r” which stands for regular fitting.

Most of our jackets are available in 3 height fittings, short(s), regular(r) and long(l).

In order to determine which length of jacket fits you, you may need to refer to the size chart below. Our sizes are fairly standard unless specified and as such if you normally wear a 42 long for example then it is likely our 42 long will fit you with all but a few exceptions.

Chest & Fitting 36s 36r 36l 38s 38r 38l 40s 40r 40l 42s 42r 42l 44s
Crown to Cuff 24.5 25.0 26.0 24.5 25.5 26.6 25.0 26.0 27.0 25.0 26.0 27.0 25.0
Jacket Length 29.5 31.0 32.5 30.0 31.5 32.5 30.0 31.5 33.0 33.0 31.5 33.5 30.0
Waist to Fit 30.0 30.0 30.0 32.0 32.0 32.0 34.0 34.0 34.0 36.0 36.0 36.0 38.0
Chest & Fitting 44r 44l 46s 46r 46l 48s 48r 48l 50s 50r 52s 52r
Crown to Cuff 26.0 27.0 25.5 26.5 27.5 26.0 27.0 28.0 26.0 27.0 26.5 27.5
Jacket Length 32.0 33.5 31.0 32.5 33.5 31.0 32.5 33.5 31.0 32.5 31.5 33.0
Waist to Fit 38.0 38.0 40.0 40.0 40.0 42.0 42.0 42.0 44.0 44.0 46.0 46.0

The key to getting the right length of jacket is to look at both the crown to cuff measurement and the jacket length. It is better if the jacket length covers your trouser seat but sometimes this can result in the jacket sleeve being either too short or too long depending on whether you have a long body or not. We would recommend to get the jacket length as close as possible and if necessary alter the sleeve length accordingly. This isn't always possible given time constraints but if you wish to speak to someone for advice please do so, we have a full in-house tailoring department that can handle alterations to both jacket sleeves and trouser bottoms fairly quickly at most times of the year. 


Our trouser sizes are listed as a number followed by a letter (30S, 30R, 30L). The number corresponds to the size of the waist measurement and the letter refers to whether the trousers are Short, Regular or Long. Short trousers have an inside leg measurement of 30 inches, Regular is 32 inches and Long is 34 inches.

For more information or assistance please email us at:

or call us on 01332 344612

Paypal Visa MasterCard Maestro American Express