Jacket - Size Guide
All sizes and measurements are approximate, however we do make every effort to ensure they are as accurate as possible.
Jackets
-
Jacket length
-
Crown to cuff
-
Chest – all the way round
The size of jacket corresponds closely to your actual chest measurement (ie a size 40r is to fit a 40 chest) . The Jacket fitting or height is indicated by the letter after the chest size. In this example by the letter “r” which stands for regular fitting.
Most of our jackets are available in 3 height fittings, short(s), regular(r) and long(l).
In order to determine which length of jacket fits you, you may need to refer to the size chart below. Our sizes are fairly standard unless specified and as such if you normally wear a 42 long for example then it is likely our 42 long will fit you with all but a few exceptions.
Chest & Fitting | 36s | 36r | 36l | 38s | 38r | 38l | 40s | 40r | 40l | 42s | 42r | 42l | 44s |
Crown to Cuff | 24.5 | 25.0 | 26.0 | 24.5 | 25.5 | 26.6 | 25.0 | 26.0 | 27.0 | 25.0 | 26.0 | 27.0 | 25.0 |
Jacket Length | 29.5 | 31.0 | 32.5 | 30.0 | 31.5 | 32.5 | 30.0 | 31.5 | 33.0 | 33.0 | 31.5 | 33.5 | 30.0 |
Waist to Fit | 30.0 | 30.0 | 30.0 | 32.0 | 32.0 | 32.0 | 34.0 | 34.0 | 34.0 | 36.0 | 36.0 | 36.0 | 38.0 |
Chest & Fitting | 44r | 44l | 46s | 46r | 46l | 48s | 48r | 48l | 50s | 50r | 52s | 52r |
Crown to Cuff | 26.0 | 27.0 | 25.5 | 26.5 | 27.5 | 26.0 | 27.0 | 28.0 | 26.0 | 27.0 | 26.5 | 27.5 |
Jacket Length | 32.0 | 33.5 | 31.0 | 32.5 | 33.5 | 31.0 | 32.5 | 33.5 | 31.0 | 32.5 | 31.5 | 33.0 |
Waist to Fit | 38.0 | 38.0 | 40.0 | 40.0 | 40.0 | 42.0 | 42.0 | 42.0 | 44.0 | 44.0 | 46.0 | 46.0 |
The key to getting the right length of jacket is to look at both the crown to cuff measurement and the jacket length. It is better if the jacket length covers your trouser seat but sometimes this can result in the jacket sleeve being either too short or too long depending on whether you have a long body or not. We would recommend to get the jacket length as close as possible and if necessary alter the sleeve length accordingly. This isn't always possible given time constraints but if you wish to speak to someone for advice please do so, we have a full in-house tailoring department that can handle alterations to both jacket sleeves and trouser bottoms fairly quickly at most times of the year.